|
Application Habitats and Rates
This product is for the control of immature mosquitoes and midges in areas where they breed and develop. This product may be used in potable water and irrigation waters, permanent and semi-permanent waters, croplands, pastures, and waters with outlets to natural water bodies. The following habitats provide examples of where the product can be applied but is not intended to be all inclusive.
- Fresh and Brackish Water: fresh water and salt marshes, ponds, lakes, storm water, drainage systems and retention & detention basins, roadside ditches, grassy swales, flooded fields and pastures, potable water containers, reservoirs, irrigated croplands, temporary and semi-permanent woodland pools, tidal water, and other areas where water accumulates.
- Residential Areas:Ponds, storm water basins, tree holes, rain barrels, landscape and ornamental ponds, tires, storm drains, stationary flower pots, pot holes, gutters, tarps, potable water containers and residential area where water accumulates and provides ideal breeding habitats for mosquitoes or midges.
- Polluted Waters:Sewage lagoons, percolation ponds, animal waste effluent lagoons, septic ditches, waste treatment facility areas, etc.
Apply from one (1) to three (3) ounces of AGNIQUE® MMF or from 0.15 lbs (2.5 ounces or 70 grams) to 0.5 lbs (8 ounces or 230 grams) of AGNIQUE® MMF G for up to 1000 square feet of water surface area, regardless of water depth. For a rate reference guide for various surface areas of water, click on the link below:
Use the following table to determine the best application rate to use in residential areas. To apply AGNIQUE® MMF onto the surface of water, use a fan spray setting on a conventional canister applicator or on the 1 L Spray Bottle to achieve rapid and effective coverage.
Do not pour or inject AGNIQUE® MMF liquid directly into the water as this may result in poor spreading and coverage of the water surface.
AGNIQUE® MMF can be used as is, without dilution.
|
Surface Area
Standing Water |
Suggested Quantity of
Agnique MMF |
| 100 square feet |
1/10 to
3/10 of an ounce |
| Every additional 100
square feet |
1/10 to
3/10 of an ounce |
| 1000 square feet |
1 to 3
ounces |
| 1/4 acre |
8 to 32
ounces (1 to 4 cups) |
| 1/3 acre |
10 to 42
ounces (1 1/2 to 5 1/4 cups) |
| 1/2 acre |
16 to 64
ounces (2 to 12 cups) |
| 1 acre |
32 to 128
ounces (4 to 16 cups) |
| Do not pour
product directly onto the water surface. For best results
apply using a fan spray. |
Download MSDS:
If you don't have Adobe Acrobat Reader click
 for a free
download.
|
|
