AGNIQUE® MMF Liquid can be applied by one of the following four conventional methods:

• Manual Sprayer
  Large areas of application can be made by individual backpack applicators with hand-activated pump sprayers or compressed-air sprayers. The unique spreadability simplifies the use of a manual sprayer. For example, product applied at one end of a pond will spread to cover the pond's surface. Because it is not necessary to apply product to all areas around the pond's perimeter, there should be a reduction of labor needed.

• Automatic Feed
  Application can be made with gravity-fed drip devices in controlled areas, such as sewage treatment ponds.

• Vehicle-mounted Sprayer
  These sprayers are best used in large wet land applications when hand spraying is not efficient, such as roadside ditches.

• Aerial Sprayer
  Application is most effective for open areas where the water surface is easily accessible.

 

AGNIQUE® MMF G (Granule) can be applied by one of the following three conventional methods:

• Manual Granule Spreaders
  MMF G can be applied with any conventional hand-held or backpack granule applicator. Hand-held applicators can include units with hand operated rotary discharge. Backpack applicators that rely on air to discharge granules through a tube (such as the Maruyama ) can also be used. It is not necessary to apply MMF G to the entire surface area of the water, as once the active ingredient is released from the granule, it will spread across the water surface much like AGNIQUE® MMF Liquid products.

• Vehicle-mounted Spreaders
  Application can be made with truck or ATV mounted granule spreaders such as those for treating roadside ditches, sewage lagoons or other bodies of water that allow perimeter access by a vehicle.

• Aerial Applications
  For large open areas, application can be made by either fixed wing or rotary aircraft.

Home | Contact Us | www.cognis.com